Home > Hard Drive > Windows Won't Boot With Second Hard Drive

Windows Won't Boot With Second Hard Drive


For you, it was not the result of the update, but in any case, you'll need to reinstall Windows. Then I transferred all of my data back to the drive and everything is back to normal. Thhe only way it will let me allocate a letter is if i select it as removable drive- then it appears in ‘My Computer' and asks if i want to format I want to say Thank YOU!!! http://teknodroid.net/hard-drive/computer-won-39-t-boot-from-hard-drive.html

If you are capable of taking out hard disk and then connecting it correctly, please quit from BIOS and power off computer. Click Next, and check that Primary Partition is selected; click Next again, to the Specify Partition Size screen (don't change the partition size in the "Partition size in MB" field); and Step 1: Back up and scout around First, back up your critical files (don't forget your Outlook .PST archive) to optical discs, an external drive, or online storage. I've also included a picture of the disk management below. ... http://www.sevenforums.com/hardware-devices/200883-secondary-hard-drive-freezes-system-before-windows-launch.html

Windows Won't Boot With Second Hard Drive

Corrupted data: If you’ve downloaded and installed files without a hitch, but suddenly out of nowhere, files have become corrupt, it’s possible that your hard drive is experiencing a gradual failure. The ribbon cable is usually quite easy to remove. Re-arranged them like so: 2x to dvd and ssd, 2x to the 2 hdds and a single one to the gpu (dropped the second dvdrw for the moment). i have windows xp so it is not showing up on my computer.

Time consuming but painless. Our PC runs Windows XP, which lets you partition and format drives within Windows. With that in mind, we’re going to show you how to prepare for the worst by bringing to your attention the warnings you should look out for. Hard Disk Not Detected Not sure for other brands of mobo's.

If you are replacing your primary hard drive, make sure you back up any data you want to save before you start. bassfisher6522 View Public Profile Find More Posts by bassfisher6522 04 Dec 2011 #4 tripdip Windows 7 Home Premium 64 bit 4 posts OS only loaded on main drive. I cloned my 90GB IDE onto a 250GB IDE using a bootable HD Cloning CD. Lol.

Tip: Depending on the BIOS used by system, the error message could also be "Operating System not Found". 5 Causes That Lead to Operating System Missing In general, both hardware issues Hard Drive Recovery Reply Kyle says: November 9, 2007 at 2:12 am Well I just wanted to say that i have been struggling with my sata HD for over a week now. There are no error messages, or anything... The hard drive is not an exception.

  • The best solution is to go into your setup menu and format the third hard drive to correspond to the primary hard drive.
  • Backup and Restore Secondary Hard Drive DisappearsI would like to apologize if this is not up to standards for the forum.
  • It's not that hard.
  • This will prevent frustrations about losing programs after you have already formatted your computer.

You Want To Install An Ssd Drive In Your Desktop Computer But The Drive Is Far Too Narrow To Fit

It's displaying an error message of primary disk failure on start-up and upon pressing the F1 key the computer restarts and the same happens again and again. https://www.pcmech.com/article/installing-a-hard-drive-step-by-step/ What might be wrong? Windows Won't Boot With Second Hard Drive Red edge of the cable is aligned with Pin 1 of the connector on the drive. Pata Hard Drives Are Older And Slower Than Sata Hard Drives Your help is greatly appreciated!

The IDE channels are also labeled as Primary (or IDE1) and Secondary (or IDE2). http://teknodroid.net/hard-drive/dual-boot-windows-7-and-10-two-hard-drives.html For instance, 3 drives that are all 7200 RPM, 320 GB capacity, and 3.0GB/s transfer rate. But I definitely need to buy a new PSU!!! We also provide an extensive Windows 7 tutorial section that covers a wide range of tips and tricks. How To Install A Second Hard Drive

any ideas on why? Thanks for sharing! After that, select a system to repair and click "Next>" to get multiple recovery tools: Here, we can choose either "Startup Repair" or "Command Prompt" to do the recovery. have a peek here More resources See also Windows 8.1 keeps restarting after running an antivirus.

Get the answer RetiredChiefApr 29, 2013, 6:29 PM First off: The CPU and the GPU are the two biggest power components. Reboot And Select Proper Boot Device Diagnosing the problem You know what the warnings signs are, but now let’s actually try and diagnose the problem. In Windows 2000/XP/Vista, your new drive will not appear at all in My Computer until you format it.

Here is my problem, the drive rails that came with my case do not fit on the hard drive.

Thanks, matey! Tip: If you transfer Windows XP from one drive to another, you may have to reauthorize Windows. Click Next yet again (to the Format Partition screen), and ensure that "Format this partition with the following settings" is selected and that the "File system" drop-down reads "NTFS." Click Next Chkdsk If it is not the hard drive, then I can imagine what the issue is.

After these operations, you can restart computer to see whether "Missing Operating System" has been solved. In the article, it mentioned that the PC should not be plugged into the internet until XP SP3 is installed; they then provided the link to d/l the SP3 patch. I have it hooked up and it is recognized in the bios but it does not show up in my computer. Check This Out Hard drives are so cheap there is no excuse nowadays Reply Greg Blaze says: October 24, 2016 at 6:37 am I went through the case of clicking noise which leads to

I toruble shoot circuits for a living and use computers every day for work. YOU CALL THAT A TIP? I used the Clean command, which totally wipes the hard drive and apparently resets whatever has been corrupted. If you don't know the difference between ide & sata then you need to read up on that before trying to fit a new disk drive or you'll end up buyiing

Thank you in advance, John Reply Vince says: April 27, 2009 at 11:13 pm John Your problem is not a hardware fail. The Hard Drive only came with a CD, no floppy disk. Also, you mentioned something that concerned me; formatting the drive. Reply Bruce says: September 9, 2008 at 11:02 pm I have a gateway computer and I added an extra hard drive to the computer and its not showing up on my

The hard drive that the system boots from is usually the primary master. Reply popop says: November 23, 2008 at 2:46 am Just lost my first hard drive ever. Reply Germ says: August 16, 2007 at 1:07 pm I inherited my works old server computer and I want to convert it to a stand alone personal PC. I did a Clean Install of Windows 7, 64 bit.

After formatting it, use Norton Ghost (or a similar program) to clone your boot drive's contents to the new drive. malcolm Reply angie says: November 11, 2007 at 3:44 pm hey i have been trying to get this to work ok so this is what i am doing i have a I read your page on installing and cloning my hard drives. But no matter what always have a backup!!!